WAVLINK EXTENDER SETUP


Slow wifi and interrupted wireless network is a thing of the past. Wavlink provides a number of products thatgive you throughout coverage. With faster internet speed, WavLink is providing routers, modems, access points, extenders, and mesh wifi system.Also, the brand is becoming immensely popular for its easy-to-install products. You can enjoy the benefits of the improved wireless network by completing the Wavlink setup. Everyone is now dependent upon the internet to execute everyday tasks. A user can simply connect to WavLink router or extender and enjoy high-speed internet services. All you need is to know how to set up wavlink and you’re good to go. On this website, we will give you updated information on Wavlink router setup, wavlink extender setup, wavlink mesh setup and wavlink troubleshooting. This website helps you completely with wavlink support.

Quick Wavlink AC1200 router installation tips




  1. To install a new router, you will have to disconnect your existing modem from the power plug.
  2. Now, connect the ethernet cable from the ethernet port of the modem to the WAN port of the router.
  3. After that, insert the power cable to the router’s power port and plug its other end into the power source.
  4. Attach the broadbandmodem to the nearby power plug. Power up the modem. Wait for it to boot up.
  5. Take another ethernet cable and connect it from the LAN port of the wavlink router. Insert its other end into the internet port on the computer device.

WavLink router setup




WavLink AC1200 is a dual-band wireless router that delivers massive internet speed allowing all the connected devices to enjoy limitless network. You must accomplish wavlink router login with the default ip address. Once you are logged into wavlink network, you can easily set up wavlink router, change or update wireless channel, configure wireless settings, and more. The installation and configuration part will remain the same for almost all the models of wavlink router. Therefore, we are taking an example of wavlink AC1200 router to explain to you the wavlink setup part.

How to set up wavlink router with wifi.wavlink.com or 192.168.10.1?

How to set up wavlink router with wifi.wavlink.com or 192.168.10.1?

Follow the below given instructions to know all about wavlink mesh router setup:

  • To get started, you needto plug in your router to the nearby power source. Turn on the router. Now, connect your Wavlink router to a wireless device. This can be done with an ethernet cable or over wifi.
  • After connecting to wavlink network, get on your preferred browser and type 192.168.10.1 or wifi.wavlink.com in the address field.
  • Next, fill in the Wavlink router login username and password in the respective field. Enter ‘admin’ in the username and password fields.
  • Once you’re successfully logged in, you will be able to set up WavLink router. You can change the settings of the wavlink network by browsing through a different section of the setup wizard.

How to configure Wavlink router?

Here’s how to configure wavlink router:

  • Get on to Wavlink setup wizard by typing wifi.wavlink.com or 192.168.10.1. Access the basic home page of wavlink router and continue with the configuration.
  • The first step will be to select your internet connection type. You can also allow the setup wizard to detect the internet connection type.
  • Your next step should be to configure the wireless settings of the Wavlink router. Provide a name to the wireless network and passkey.
  • After making all the changes, click on the ‘save’ option. Click the ‘Finish’ option to complete the Wavlink router setup.
How to configure Wavlink router?

WavLink router Troubleshooting




If you are facing issues while getting into wavlink router login then you can try some troubleshooting methods to resolve the issue.



why do you need wavlink extender?




wavlink setup, wavlink router setup, wavlink extender setup, wavlink router login, wavlink support, wavlink customer care number

WavLink provides a great range of wireless repeater at affordable price range with different features. If you are facing dead spots or slow wifi signals at the corners of your place then you must get wavlink repeater.The extender takes the signal from the existing router and then rebroadcasts it to the larger area. You will need to complete the wavlink extender setup to enjoy an extended network. With http://ap.setup, you can access wavlink extender login page. There are two ways to go through wavlink extender setup- WPS and web browser method.

http://ap.setup wavlink extender

Go through the web-based wavlink setup. You will require an updated version of an internet browser. You must also have a device with Wi-Fi capability.

  • Place your wavlink extender next to your router for the initial installation part. Plug it into a power source and turn on the device. Now, Give it a few seconds for the power LED on the router to light up.
  • Next, you will need to make connection to your wifi device. To do that, grab your wifi enabled device such as laptop and connect it to the wavlink network. Go to the Wi-Fi tab on your computer and look for wavlink network. Enter a wifi password of your extender.
  • Get access to a browser and in the address bar type http://ap.setup. You will reach into Wavlink extender login screen. Leave the username field blank and enter the ‘admin’ the password field.
  • Once you get into wavlink setup wizard, click on the ‘Scan now’ option to scan the available nearby options. Select and connect to your home network. Provide your wireless network a wifi password.
  • On the next page, you can configure the wireless settings of the wavlink network. Give an SSID and password to your wavlink network. Click on the ‘save’ option to apply the settings.
  • You will be displayed with the summary of wavlink network. Click on ‘save’ to apply the settings. Click on ‘Finish’ to complete the wavlink extender setup. Your device will now go to the reboot phase.

WavLink extender setup with WPS method

WPS method is a faster way to get your Wavlink extender up and running in no time. For those, who are not well-aware of the technical part can go for this method. Refer to the following instructions:

  • Bring in your Wavlink extender and place it somewhere near to your existing router. Connect it to the power source and wait for it to start up.
  • Find the WPS button on the wavlink extender. You need to press the buttonfor a few seconds.Wait for a few seconds. Then, WPS button on the Wavlink extender and press it hard.
  • Once the WPS light is stable, it means the connection is formed. Now, you can connect your wifi devices to the wavlink extended network.

WavLink extender troubleshooting




Not getting enough signals from the wavlink extender?

If you are not getting enough signals from wavlink extender then it could be due to the wrong placement of the device. The best location to place your wavlink extender is midway between the wireless router and area with low wifi signals. Other factors that you must keep in mind while placing wavlink extender are as follow-

  1. Place your wavlink extender in a central location.
  2. Avoid placing the wavlink device in a closed place such as cupboard.
  3. Keep it away from thick walls, bricks, or concrete walls.
  4. Do not cover the extender with anything.
  5. Keep it away from other frequency devices such as microwave, cordless phones, bluetooth speakers etc.


Wavlink mesh setup




If you have a large home or office then there are chances that you might face wifi dead spots at the corners of the place. Wireless router and extender can only extend the network to a certain distance. In this situation, you can bring home Wavlink mesh halo wifi system. Wavlink mesh network is a perfect solution as it can provide additional coverage to 5,000 sq. Ft. The whole-home Wi-Fi system will keep your home covered with wireless signals. Best of all, setting up wavlink mesh system is easy via wavlink app

How to setup wavlink mesh router?




Hardware connection

  1. To start off, you need connect your broadband modem to the internet.
  2. Jump on to Connect the ethernet port of the router to the modem. Take an an ethernet cable to do so.
  3. Plug in the wavlink router to a power source.

To set up Wavlink mesh Wi-Fi system, you can choose any of these methods:

WavLink app

  • Begin by Visiting to the Play Store or App Store. Search for Wavlink app. You can download the app for free. Once the app appears, click on it to install the app.
  • Open the app on your mobile device. You will first need to create Wavlink account. Provide the necessary details. You will be asked with your email address and password, enter those.
  • Select your Wavlink device from the list. Follow the in-app prompts to complete the wavlink mesh setup.
 wavelink ac1200 extender setup, wavelink ac1200 setup, wavelink mesh wifi setup, vwavlink mesh setup, how to setup wavlink mesh router

Web browser

  • Connect your computer to the wavlink network. To do that, you need to click on the ‘Wi-Fi’ tab. Select the Wavlink network from the list and enter the wifi password.
  • Get on a browser and type http://wifi.wavlink.com or 192.168.10.1 in the address bar. You will need to provide the login credentials. If you are signing in for the first time, enter ‘admin’ in the required field.
  • Select your country, region, time-zone respectively. You will need to enter a new login password. This password can be used for future logins.
  • Select your router from the drop-down menu. Next, select your internet connection type. You can also allow the setup wizard to select your internet connection type automatically.
  • Change the default wireless settings of the wavlink network. You need to provide a new SSID ( Network name) and passkey to your wavlink network. Select the security type from the drop-down window.
  • Click ‘Apply’ to save the basic settings. The basic setup process will atke a few minutes to complete.

Add an extender

Next, you will need to add an extender to the wavlink network. Just find a perfect spot and you’re good to go. You can enjoy multiple extenders to enjoy a seamless internet experience.

via web browser

  1. Open up a browser and visit wifi.wavlink.com or 192.168.10.1 on your desired browser. Click on the ‘log in’ option.
  2. Go to ‘Wi-Fi’ and select ‘Mesh network’ from the list.
  3. Enter the mac address labeled on the device. Then click on the (+) icon to join the network.

via pair button

  1. Plug the extender in a power source near to your wireless router.
  2. Press and hold the pair button on the extender for a few seconds. Wait for a few seconds and press the pair button on the router.
  3. The LED of the router and extender will turn solid blue. This concludes the pairing process.
  4. Find an ideal position to place your extender.

LED light indicators




Mesh router

  • Solid Purple-Start up
  • Solid blue- The internet is connected
  • Flashing blue- Touchlink setup
  • Flashing red- The router is disconnected

Mesh extender

  • Solid Purple-Starting up
  • Solid blue- The connection between the router and the extender is good.
  • Solid red- The connection between the extender and the router is weak. Shorten the distance between the devices.
  • Flashing blue-Mesh pair is activated
  • Flashing red-The extender is disconnected